hi not sure if this has been asked before

For more information, please visit Pipe Fittings Tee Reducer.

i use the pipe Tee fitting that comes with revit, whenever i have to different pipe sizes it always puts a reducer on

is there any way for this not to happen.

ive attached a pic.

Thanks

Difference between Equal Tee And Reducing Tee

--

Pipe tee is a type of pipe fittings which is T Shaped also heaving two outlets, at 90 degrees to the connection to the main line.

What Is Buttweld Equal Tee?

Equal Tee (or straight tee) means that the branch diameter of this tee is the same as that of the main pipe (Run pipe) of this tee. Designed and constructed in the form of the ‘T’ alphabet, this type of fitting can be used to connect two horizontal and one vertical pipe. Widely used in various piping systems in a number of sectors, these tees are available in a wide range of surface finishes, such as hot-dip galvanized, epoxy coated and electro-polished.

The equal tee (or straight tee) is used so the branch has the same width as the run pipe. Equivalent Tee is designed to take care of any heavy or low-weight movement of fluid through it. Buttweld Equal Tee is for the same channel and outlet sizes, but, consumers will gain from us “decreasing” tees such that maybe a few closes with different ones in measurement, this is considered an equal tee. Due to their dimensional contrast, these tee fittings aid with the ability to control the volume as desired.

FEATURES OF EQUAL TEE

● A straight or equal butt welding Tee is available for all common diameters.

● Reliable trouble-free connection, Installation time is greatly reduced when compared against traditional fixing methods.

If you are looking for more details, kindly visit Long Radius Elbow Bend 90 Degree.

● Owing to its various sizes, it is economical and convenience in many industries, especially in long-distance pipeline transportation.

● There are three female openings in a ‘T’ formed pipe tee.

● There are straight pipe tees which have the same size openings.

● Equal tee makes them open of various size and two openings of the same size.

● There are sterile equal tees which are utilized as a part of waste lines. These types of equal tees have a bent branch which is intended for a wipe outfitting. They are utilized to avoid obstruction of waste.

● An equal tee utilizes pressure fittings on two or more finishes.

● An equal tee has a strong opening. This opening is utilized as a part of conjunction with a strong fitting to get an opening on a drain pipe.

What are buttweld reducing tee?

Reducing tee is a type of pipe tee used in pipe and tube fittings. Two common types are available for pipe tees, with all outlets of the same size or tees in which they are with a mixture of different outlet sizes can be reduced. Like all pipe tees, the reduction tee is in the form of a T with two ends of similar size and a slightly smaller third end. In other words, tee reduction is a form of pipe fitting where the size of the branch port is smaller than the launch ports. The size reduction from one of the ports to the other may also be considered for this form of pipe fitting.

In a piping scheme, Buttweld Reducing Tee plays the role of both a reducer and a tee. It allows 3 pipes of different diameters to be connected into a structure. Other than this, fluid movement in and out of the pipe is limited.

These pipe fittings, in compliance with international guidelines, are wisely crafted from the highest grades of stainless steel. All of these reduction tees have been extensively checked whether they can withstand varying temperatures and pressure levels in a setting.

These pipe fittings have three openings in the building for linking pipes.

The primary use of industrial pipelines is to adjust the flow of liquid or gas or to decrease the fitting size of a branch. These are available in both threaded and unthreaded end connections, where threaded connections have a tighter seal than unthreaded connections. Our entire stock is mainly supplied for use in various gasoline, beverage, petroleum, food processing and building industries.

In terms of dimension, scale, shape, wall thickness and construction materials, we have diverse options in our stock. We suggest our nickel reduction tees or Cupro nickel reduction tees and Hastelloy reduction tees for outstanding mechanical efficiency, high corrosion and oxidation resistance. Due to their excellent heat resistance forces, these reduction tees are particularly good for use at high temperatures.

What are the uses of buttweld reducing tees?

● Buttweld reducing tees are used in different pumping applications to have mechanical connections of high integrity.

● They are widely used for applications with positive pressure and vacuum.

● These are also used in devices of ultra-high purity.

● It features unique machining and surface improvement that can prevent corrosion from outgassing and inhibiting.

● In order to feed icemakers and other applications that require a reduction in tee fitting, the reduction of pipe tees is often used to minimise distribution lines.

● Buttweld reducing tee usually offers smooth flow paths and no congestion or traps are present.

● These tees are used for water, drain pipes, natural gas, gasoline, etc.

Difference Between Equal Tee And Reducing Tee

Steel Equal Tees pipe fittings: The three branches of tee have same diameters.

Steel Reducing Tees / Reducer tee pipe fittings: The branch diameter is smaller than the main line diameter.

Tee reducer is usually described as NPS diameters in 4” x 4” x 3”, 4” is the main line pipe diameter, and 3” is the reducing branch.

Reducing tees is used more than equal tee since it has more functions and available for more environments.

A straight or equal buttwelding Tees is available for all common diameters.

A Reducing Tees not, because many diameters are not produced, or can not be produced.

If you want to learn more, please visit our website 45 Degree Black Pipe Elbow.